ActionTec PC-260 User's Guide download pdf (Page 77)

Index

PC-250, PC-260, and PC-300 User’s Guide Page 77

This message indicates one of the following problems and possible

solutions:

Problem Solution

The self test failed. Refer to the Self Test Failed

section before you call The

Manufacturer’s Technical

Support.

The Card Reader is not

installed.

Install the ISA Bus Board and

restart the system. Watch the

responses the drivers give

carefully.

You’re using a third-party’s Card

and Socket Services software

that conflicts with Card and

Socket Services software.

Remove all other Socket

Services drivers from your

system and try again.

Drive Assignment Conflicts

MS-DOS keeps track of all drive letters in the system. CardTalk

determines the last MS-DOS drive letter and assigns the Card Reader’s

socket(s) to the next available letter(s) in socket order. This works as

long as all drives in the system are MS-DOS drives. If, however, you

are connected to a network (such as a Novell network) or have a drive

(such as a SCSI or CD-ROM drive) that uses drive letters not accounted

for by MS-DOS, the letter(s) assigned to the Card Reader’s socket(s)

may conflict with the non-MS-DOS drives. The conflict occurs at the

time MS-DOS loads the Super Client driver, CARDTALK.SYS from

the CONFIG.SYS file.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 83 84 85

No comments

ActionTec PC-260 User's Guide Page 77