ActionTec T2200H User Manual download pdf (Page 58)

Actiontec USB/Ethernet DSL Modem User Manual

Chapter 7 Using the Modem’s Utilities

Restore Default Settings

To restore the Modem to its factory default settings, select Restore Default Settings

from the Utilities tab. When the “Restore Default Settings” screen appears, click

Restore Default Settings. Any changes made to the Modem’s settings will be lost

and the factory default settings restored. During this process, the Modem’s Power

light flashes and the Modem is disabled.

Warning: Do not unplug the Power cord from the Modem dur-

ing the Restore Default Settings process. Doing so may result in

permanent damage to the Modem.

When the Power light stops flashing and glows steadily green, the Modem is fully

operational, with its default settings reloaded.

Upgrade Firmware

Selecting Upgrade Firmware in the Utilities tab generates the “Select Upgrade File”

screen. Actiontec periodically posts firmware upgrades to enhance the Modem’s

capabilities. Follow the instructions on-screen to upgrade the Modem’s firmware.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 112 113

No comments

ActionTec T2200H User Manual Page 58