ActionTec T2200H User Manual download pdf (Page 41)

Actiontec USB/Ethernet DSL Modem User Manual

Chapter 6 Configuring Advanced Settings

The “LAN IP Address” screen appears.

The values in the “LAN IP Address” and “Netmask” text boxes are the IP address

and subnet mask address of the Modem as seen on the network. These values can

be modified for your LAN network, but Actiontec recommends keeping the default

factory settings (IP address - 192.168.0.1; subnet mask - 255.255.255.0).

☞

Note: If the Modem’s LAN IP Address is modified, verify the

DHCP Server range is within the same subnet. For more infor-

mation, see “DHCP Server Configuration.”

After changing settings, click Apply & Reboot reboot the Modem and make all

changes permanent.

WAN IP Address

Selecting WAN IP Address in the Advanced Setup tab generates a “Warning” screen.

After reading the on-screen information, click Yes.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 112 113

No comments

ActionTec T2200H User Manual Page 41