ActionTec T2200H User Manual download pdf (Page 39)

Actiontec USB/Ethernet DSL Modem User Manual

Chapter 6 Configuring Advanced Settings

DHCP Settings

Selecting DHCP Settings in the Advanced Setup tab generates the “DHCP Settings”

screen. The Modem has a built-in DHCP (Dynamic Host Configuration Protocol)

server that automatically assigns a different IP address to each computer on the

network, eliminating IP address conflicts.

The factory default setting is On. To disable the DHCP server, select Off.

Actiontec strongly recommends leaving the DHCP Server option On. If the DHCP

Server option is Off, ensure the IP addresses of the networked computers are

on the same subnet as the IP address of the Modem. For more information, see

“DHCP Server Configuration.”

DHCP Server Configuration

Clicking in the “I would like to adjust the DHCP Server settings” check box allows

values to be entered in the text boxes in the lower part of the DHCP Settings screen.

Change IP address range and DNS server information here.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 112 113

No comments

ActionTec T2200H User Manual Page 39